The hd C5CX
is a passive 2 1/2-way small speaker equipped with four 3″ woofers and a 3.5″ coaxial speaker with 1″ tweeter with extended linear frequency response. The operation can be done via any power amplifier without DSP and makes the hd C5CX the optimal solution for decentralized or small sound applications such as in restaurants, conference rooms or theaters.
The hd C5CX can be flexibly and easily installed permanently or can be used as a mobile device. Using the subtle ball joint wall mount, the hd C5CX can easily be tilted and tilted or attached to the surface to be fixed with the L-angle wall mount extremely close and inconspicuous. Internal terminal block connections ensure a tool-free and quick connection of the loudspeakers. The loudspeaker can be customized in all RAL colors and special lengths for optimum adaptation to the room architecture. If wall mounting is not possible, the speakers can be used with the optional 3/8″ threaded base plate and SpeakCON jack on a microphone stand.
Extremely powerful subwoofers of the hd Sub- or hd P-Series with up to 1800 W AES power handling capacity extend the low-frequency sound experience down to the infrasound range. The most elegant solution for extending the bass range of the hd C-Series is the super slim hd Slim265 design subwoofer. Due to its low height of just 102 mm, it fits into any suspended ceiling, can be mounted on a wall or placed invisibly under a piece of furniture.
||1x 3.5″ woofer
1x 1″ tweeter
4x 3″ woofer
|Power handling capacity (RMS/Peak)
||190 W / 225 W
||90 Hz – 22 kHz
|Sensitivity (1 W / 1 m)
|Max. sound pressure (1 m)
|Nominal dispersion angle
||horizontal 80° x vertical 80°
||1x clamp connection inside
|Dimensions (B x H x T)
||108 x 460 x 104 mm
||Powder-coated aluminium profile black
Steel grille with acoustic foam
Clamping terminal inside
Cable insert at the back
continuous metal rail incl. 2x M6 nuts
3/8“-thread + NL4
35 mm flange + NL4