hd C3CX
Commercial Stick
The hd C3CX can be flexibly and easily installed permanently or can be used mobile. Using the discreet ball joint wall mount, the hd C3CX can easily be tilted and tilted or attached to the surface to be fixed extremely close and inconspicuous with the L-angle wall mount. Internal terminal block connections ensure a tool-free and quick connection of the loudspeakers. The loudspeaker can be customized in all RAL colors and special lengths for optimum adaptation to the room architecture. If wall mounting is not possible, the speakers can be used with the optional 3/8″ threaded base plate and SpeakCON jack on a microphone stand.
Extremely powerful subwoofers of the hd Sub- or hd P-Series with up to 1800 W AES power handling capacity extend the low-frequency sound experience down to the infrasound range. The most elegant solution for extending the low frequency range of the hd C series is the super flat hd Slim265 design subwoofer. Due to its low height of just 102 mm, it fits into any suspended ceiling, can be mounted on a wall or placed invisibly under a piece of furniture.
| Modelname | hd C3CX |
|---|---|
| Principle | Coaxial loudspeaker |
| Transducers | 1x 3.5″ woofer chassis 1x 1″ tweeter 2x 3″ woofer chassis |
| Crossover Frequency | 4 kHz |
| Power rating (RMS / Peak) | 115 W / 160 W |
| Frequenzy Range | 100 Hz – 22 kHz |
| SPL (1 W / 1 m) | 90 dB |
| SPLmax | 112 dB |
| Nominal dispersion angle | horizontal 80° x vertical 80° |
| Nominal impedance | either 4 Ohm or 8 Ohm |
| Connection | 1x clamp connection inside |
| Dimensions (W x H x D) | 108 x 280 x 104 mm |
| Weight | 2 kg |
| Enclosure | Powder-coated aluminum profile, black Steel grille with acoustic foam Internal clamp terminal Rear cable inlet Incl. 2x M6 nuts |
| Options | Speakon NL4 3/8″ thread + NL4 35 mm flange + NL4 RAL color Wall bracket Special length Weather protection 100V |






