The hd PL24i
PowerLine Stick is equipped with twenty-four 3″ broadband speakers. The elegant rounded loudspeaker housing made of aluminum allows a particularly high packing density of the loudspeakers. Therefore, the twenty-four drivers couple to a wavefront that opens vertically at 8°, so that the system operates on the principle of the cylindrical wave. The result is a consistent sound pressure level and nuanced sound from the first to the last row. The large throw range of up to 30 m and horizontal coverage of 80° ensures efficient sound solutions with only a few speakers. This leads to more direct sound, offers a higher speech intelligibility and a high feedback safety in acoustically problematic rooms, with lower basic volume. Therefore, the hd PL column speakers are ideal for voice and music transmission in halls and churches.
Compared to the hd ML32i, the hd PL24i shines with a lower total height at the same weight, which means it can be used in locations with a low ceiling height. Due to the increased directivity of the 3″ chassis, the horizontal sound opening angle is 80° and ensures that the sound energy is bundled even more and thus allows a greater throw range. With a larger membrane surface area than the hd ML32i, the reproduction of music and speech in the low-mid range of the hd PL24 is even more powerful and a higher sound pressure can be achieved.
In order to transmit a sound event from the fundamental to the overtones, conventional loudspeakers use two or three different types of transducers. This results in incoherence not only in the crossover areas, but also in the important mid-frequency-range due to the different decay times and the different diaphragm mass of the transducers types in a different “response characteristic”. Especially in the reproduction of instruments or speech in which the fundamental range is covered by the one type of transducer and the overtone range by the other type of transducer, the sound is distorted. This is where the hd PL-Series 1-way design shines: full-range speakers that cover the fundamental range up to the harmonic, the linear array with its LineArray benefits, and the coherence of the sound wave, with no “phasing” and group delay a listening experience in a class of its own.
The continuous U-slot for M6 square nuts on the back allows any mounting of wall brackets. Internal clamping connections ensure a tool-free and quick connection of the loudspeaker. For optimum adaptation to the room architecture, the loudspeaker can be customized in all RAL colors and special lengths.
||24x 3″ fullrange chassis
||active at 80 Hz
|Power handling capacity (RMS/Peak)
||900 W / 1260 W
||80 Hz – 18 kHz
|Sensitivity (1 W / 1 m)
|Max. sound pressure (1 m)
|Nominal dispersion angle
||horizontal 80° x vertical 8°
||1x clamp connection inside
|Dimensions (W x H x D)
||108 x 2001 x 104 mm
||Powder-coated aluminium profile black
Steel grille with acoustic foam
Clamping terminal inside
cable inlet rear incl. 2x M6 nuts
multiple wall mount